Mining Filtration Solutions

General Mineral Slurry
Treatment

Engineered ceramic filtration for complex, multi-variable slurry conditions -- delivering consistent dewatering performance regardless of ore type, pH range, or equipment origin.

Alumina Purity
≥95%
pH Tolerance
1-14
Plate Range
1-6 m²
Custom Engineering
Full CAD

Operational Challenges

The real pain points holding your filtration back

Mineral processing plants handling diverse ore streams face a unique set of filtration challenges that generic solutions simply cannot address. Here is what our customers tell us -- before they switch.

Variable Slurry Conditions

Integrated mineral processing plants and industrial operators often handle slurries with widely varying pH -- from strongly acidic leach residues to highly alkaline flotation tailings. Particle size distributions are equally unpredictable. Standard filter plates suffer rapid pore blinding, premature structural failure, and unpredictable cycle times that cripple throughput.

Typical failure mode

Pore clogging within 60-90 days; cracking under pH cycling stress

Non-Standard Equipment Sourcing

Aging filter machines or equipment sourced from multiple manufacturers create a parts procurement nightmare. Replacement plates and nozzle fittings that match the original geometry are often discontinued or prohibitively expensive. The alternative -- full machine overhaul -- carries capital costs that most maintenance budgets cannot absorb.

Typical failure mode

Forced downtime; makeshift adaptations causing vacuum loss and leakage

Fragmented Maintenance Inventory

Filter plates, scrapers, friction rings, and seals are sourced from different suppliers with inconsistent quality standards. Maintenance teams manage multiple vendor relationships, unpredictable lead times, and mismatched components that increase assembly errors and unplanned stoppages -- raising total maintenance cost significantly.

Typical failure mode

Component mismatch; inflated spare-parts inventory; extended MTTR

Engineering Responses

How we solve each challenge -- technically

Every solution we deliver is grounded in materials science, precision manufacturing, and deep knowledge of mineral processing operations.

Solution 01

Broad Material Adaptability:
≥95% Alumina Ceramic Matrix

Our ceramic filter plates are manufactured from a high-purity alumina substrate with alumina content of ≥95%, providing exceptional chemical inertness across the full pH spectrum from 1 to 14. Whether your process involves strongly acidic lithium salt leach residues, corrosive lead-zinc tailings, or high-alkalinity flotation concentrates, the ceramic matrix maintains structural integrity and consistent pore performance throughout the service life.

The controlled microporous structure -- engineered through our proprietary water-casting and whole-body sintering process -- resists pore blinding even under variable particle size distributions. Pore diameter is calibrated to your specific slurry characteristics, ensuring stable filtration rates and predictable cake moisture content cycle after cycle.

Full-spectrum pH Resistance

Withstands pH 1-14 without surface degradation, pore enlargement, or structural cracking -- validated for lithium leach slags, sulfide tailings, and carbonate-rich concentrates.

Anti-Blinding Micropore Architecture

Uniform pore distribution with tight size tolerance prevents fine-particle lodging. Backwash regeneration restores >98% of original flux after each cycle.

High-Strength Monolithic Body

Integral forming and sintering eliminates bonded interfaces -- the primary failure point in composite plates -- delivering consistent mechanical strength under cyclic vacuum loading.

Typical Applications

Lithium salt leach residue · Lead-zinc tailings · Mixed sulfide concentrates · Carbonate slurries · Industrial mineral dewatering

Full Reverse-Engineering Capability

Submit a worn plate, a physical sample, or an existing drawing. Our engineering team performs complete dimensional mapping and produces a certified production drawing within 5-7 working days.

CAD-Based Custom Tooling

Every non-standard plate is manufactured against a verified CAD model. Tolerances are held to ±0.3 mm on critical sealing and mounting surfaces, ensuring drop-in installation without machine modification.

Pore Diameter Customization

Pore size is specified per application -- from fine-particle concentrates requiring tighter pores to coarse tailings benefiting from higher permeability -- eliminating the compromise of off-the-shelf plates.

Supported Machine Types

Disc vacuum filters · Horizontal belt filters · Drum filters · Legacy and discontinued OEM models · Any machine for which drawings or samples can be provided

Solution 02

1:1 Reverse Engineering &
Custom Pore Specification

Equipment obsolescence should never force a costly machine replacement. Our reverse-engineering service accepts physical samples, worn plates, or CAD drawings from any filter machine -- regardless of age or origin -- and produces dimensionally exact replacement ceramic filter plates that install without modification.

Beyond dimensional replication, we re-engineer the pore structure to match your current slurry characteristics -- not the original OEM specification that may have been designed for a different ore body. The result is a replacement plate that fits perfectly and outperforms the original.

Solution 03

One-Stop Maintenance Kit:
Plates + Scrapers + Friction Rings

We supply every critical wear component of the vacuum ceramic filter as a matched set -- ceramic filter plates, ceramic scrapers, friction rings, seals, and nozzle fittings -- all engineered to the same dimensional standard and dispatched from a single source.

Maintenance teams receive a plug-and-play replacement kit that eliminates cross-vendor compatibility risks, reduces spare-parts inventory to a single SKU per machine, and shortens planned maintenance windows. Consolidated procurement means fewer purchase orders, consistent quality across every component, and a single technical contact for the entire filtration system.

Ceramic Filter Plates

≥95% alumina, custom pore size, full pH range, dimensionally matched to your machine. Available in standard and custom geometries across 1-6 m² active filtration area.

Ceramic Scrapers

Wear-resistant ceramic scraper blades engineered for consistent cake discharge without plate surface damage. Longer service life versus standard polymer scrapers in abrasive slurry conditions.

Friction Rings & Seals

Precision-dimensioned friction rings and sealing components that maintain vacuum integrity over extended operating periods. Material grades selected to match your operating temperature and chemical environment.

Kit Benefits

Reduced inventory SKUs · Single-vendor quality control · Coordinated lead times · Plug-and-play installation · Lower total maintenance cost

Material & Performance Data

Key technical parameters

Specifications that define performance in demanding general mineral slurry applications.

Parameter Value / Range Significance
Alumina content ≥ 95% Chemical inertness across full pH range; structural durability
pH tolerance 1 - 14 Suitable for acidic leach residues through alkaline flotation tailings
Pore diameter Customizable Matched to slurry particle size distribution per application
Active filtration area 1 - 6 m² Compact to standard configurations; custom sizes available
Dimensional tolerance ± 0.3 mm Critical sealing and mounting surfaces for drop-in installation
Manufacturing process Integral forming + whole-body sintering Eliminates bonded interfaces; maximizes structural homogeneity
Custom engineering input Sample / drawing / CAD Supports any legacy or non-standard machine type
Spare parts supply Full kit (plates + scrapers + rings) Single-source procurement; matched component quality

Product Selection Guide

Recommended configurations for general mineral slurry treatment

Three product tiers designed to match your operational scale, equipment type, and process complexity -- from compact installations to fully bespoke engineering projects.

1m² to 3m² compact ceramic filter plate for small-scale mineral slurry treatment
Compact Series

1 - 3 m²

active area

Compact Filter Plates

Designed for smaller-scale mineral processing operations, pilot plants, and installations where footprint is constrained. The compact series delivers full-specification ≥95% alumina performance in a smaller plate geometry -- ideal for processing varied ore samples, specialty mineral concentrates, or multi-product facilities handling low-to-medium throughput slurry streams.

  • Plate area: 1 m² to 3 m²
  • Full pH 1-14 chemical resistance
  • Custom pore diameter available
  • Matching scraper & seal kits supplied
  • Suitable for: specialty minerals, pilot processing, multi-ore facilities
Request specifications
Most Selected
4m² to 6m² standard ceramic filter plate for industrial mineral slurry dewatering
Standard Series

4 - 6 m²

active area

Standard Filter Plates

The workhorse configuration for industrial-scale mineral processing. The standard series covers the most common machine sizes deployed in concentrate dewatering and tailings treatment across iron ore, copper, gold, lithium, nickel, and lead-zinc operations. Engineered for continuous high-throughput duty with consistent cycle performance and low moisture output.

  • Plate area: 4 m² to 6 m²
  • High-throughput continuous dewatering
  • Low cake moisture output
  • Full maintenance kit: plates + scrapers + friction rings
  • Suitable for: iron ore, copper, gold, lithium, nickel, lead-zinc
Request specifications
Custom engineering mode for bespoke ceramic filter plate design from drawings or samples
Custom Engineering

Any Size

bespoke

Custom Engineering Mode

For non-standard machines, legacy equipment, or unique process conditions that fall outside catalog specifications. Submit a worn plate, a physical sample, or a CAD drawing -- our engineering team will reverse-engineer exact replacement geometry, specify the optimal pore structure for your slurry, and deliver a certified production batch. No machine modification required.

  • Input: sample, worn plate, or drawing
  • Full reverse-engineering & CAD verification
  • Dimensional tolerance ±0.3 mm on sealing surfaces
  • Pore diameter optimized for your slurry
  • Suitable for: any legacy or non-standard machine
Discuss your project

Not sure which to choose?

Send us your machine model number, slurry type, and throughput target. Our engineers will recommend the right configuration.

Maintenance kits available

All product tiers can be supplied with matching scrapers, friction rings, and sealing components as a complete maintenance set.

Global supply

We supply to mining operations worldwide. Export documentation, customs classification, and technical datasheets provided.

Why choose us

The operational advantages that matter to your plant

Our approach combines advanced materials science, precision manufacturing, and deep process knowledge to deliver measurable improvements in filtration efficiency, equipment uptime, and total operating cost.

Higher Filtration Efficiency

Controlled micropore architecture delivers stable vacuum permeability and consistent cake moisture content -- reducing downstream drying energy and transport costs.

Extended Service Life

High-purity alumina body with integral sintering resists abrasion, chemical attack, and thermal cycling -- significantly outlasting conventional ceramic and polymer filter media.

Simplified Procurement

One supplier for plates, scrapers, friction rings, and seals. Fewer purchase orders, consistent quality, and a single technical contact -- reducing administrative overhead and supply chain risk.

Water Recovery Support

Clean filtrate output supports process water reuse and reduces fresh water consumption -- contributing to green mine certification and sustainable operational targets.

Ready to solve your mineral slurry filtration challenges?

Share your machine model, slurry type, or send us a sample plate. Our engineers will respond with a tailored recommendation.