Vacuum Ceramic Disc Filters · Standard Series

Standard Sector Plates 4 m² · 5 m² · 6 m²

The mainstream benchmark specification for global mid-size mining operations. Engineered for continuous vacuum disc filter systems spanning 12 m² to 90 m² total filtration area -- precision-ground for 100% mechanical alignment and stocked for rapid emergency replacement.

System Fit
12-90 m²
Flow Cross-Section
80%
Flatness Tolerance
±0.3 mm
Variants
3 Sizes

Product Positioning

The global standard for mid-size continuous dewatering.

Designed specifically for mid-capacity mining operations where consistent throughput and minimal downtime are non-negotiable. Our Standard Sector Plates deliver OEM-grade dimensional precision across three of the most widely deployed disc filter configurations in global mineral processing.

From iron ore concentrate dewatering to copper tailings management, these plates are engineered to match the exact spindle geometry of major filter brands -- enabling drop-in replacement without process interruption.

Safety stock maintained year-round for emergency fast-track delivery to any global mining site.

100% Mechanical Alignment

Precision-machined collar geometry ensures zero-gap spindle fit on standard disc filter shafts.

80% Flow Cross-Section

Interconnected internal waterways maximise filtrate evacuation rate and reduce cycle time.

±0.3 mm Flatness

Precision-ground surface ensures consistent scraper blade contact and clean cake discharge.

Emergency Stock Ready

All three size variants held in safety inventory for rapid global dispatch with minimal lead time.

Engineering Specifications

Series-wide performance parameters.

The following specifications apply uniformly across all three disc size variants in the Standard Sector Plate series.

System Compatibility

12 - 90 m²

Mid-size continuous vacuum disc filter systems. Covers the most common total filtration area configurations deployed in global mineral processing plants.

Continuous Operation

Internal Waterways

80%

Interconnected flow cross-section through the internal channel network. Maximises filtrate evacuation velocity and supports lower cake moisture content at discharge.

Interconnected Flow Design

Flatness Tolerance

±0.3 mm

Precision-ground working surface tolerance. Ensures uniform scraper blade contact across the full plate face for consistent, clean cake discharge with no blind zones.

Precision-Ground Surface

Material

High-purity alumina ceramic membrane, integral sintering process

Spigot Material

SS304 stainless steel water spigot, corrosion-resistant

Assembly Collar

Polyethylene (PE) collar for vibration-dampening spindle connection

Manufacturing

Integral forming, whole-body sintering, advanced water-casting

Dimensional Reference

Per-plate dimensional specifications.

All dimensions are for individual sector plates. Tolerances listed are manufacturing control limits. Verify against your machine's OEM drawing before ordering.

4

4 m² Disc -- Standard Sector Plate

Individual plate dimensions · All tolerances are ± unless noted

Parameter Dimension Tolerance
Outer Arc Width 555 mm ± 3 mm
Inner Base Width 338 mm ± 3 mm
Plate Height 441 mm ± 3 mm
Plate Thickness 30 mm ± 0.4 mm
SS304 Water Spigot OD 19 × L35 mm --
Assembly Collar (PE) OD 50 / ID 14 mm --

Application Notes · 4 m²

  • Suited for smaller mid-size disc filter systems, typically 12-36 m² total area configurations.
  • OD 19 × L35 mm spigot provides reliable filtrate evacuation with standard manifold connections.
  • PE OD50/ID14 collar dampens vibration transmission to the ceramic body during continuous rotation.
  • 30 mm plate thickness provides the optimal balance between structural rigidity and weight per disc sector.

Dimensions verified against standard spindle geometry. Contact our engineering team for non-standard spindle configurations.

Side-by-Side Comparison

Parameter 4 m² Disc 5 m² Disc 6 m² Disc
Outer Arc Width 555 ± 3 mm 560 ± 3 mm 603 ± 3 mm
Inner Base Width 338 ± 3 mm 295 ± 3 mm 294 ± 3 mm
Plate Height 441 ± 3 mm 540 ± 3 mm 619 ± 3 mm
Plate Thickness 30 ± 0.4 mm 30 ± 0.4 mm 32 ± 0.4 mm
SS304 Spigot OD 19 × L35 OD 19 × L32 OD 19 × L32
PE Collar (OD/ID) OD50 / ID14 OD56.5 / ID16 OD50 / ID14
Typical System Range 12 - 36 m² 20 - 60 m² 36 - 90 m²

Manufacturing Excellence

Engineered from raw material to final inspection.

Every Standard Sector Plate is produced at our dedicated facility featuring integral forming lines, high-temperature sintering kilns and physicochemical testing laboratories. Our R&D partnership with Shandong University of Technology's New Materials Laboratory continuously refines microporous ceramic formulations and forming processes.

Integral Sintering

Whole-body sintering eliminates interface weakness between ceramic layers.

Water Casting

Advanced water-casting process ensures uniform micropore distribution across the membrane surface.

Physicochemical Testing

In-house laboratory validates porosity, strength and dimensional accuracy on every production batch.

Patent-Protected Process

Multiple registered patents covering sector plate production methodology and ceramic formulation.

CeramTek manufacturing facility -- high-temperature sintering kiln and forming production line

10+

Years Specialised

400k

Annual Capacity (plates)

Multi

Production Patents

Global

Mining Customers

Mineral Processing Applications

Proven across global mining circuits.

Standard Sector Plates are deployed in concentrate dewatering and tailings management operations across all major mineral types.

Iron Ore

High-volume concentrate dewatering with demanding slurry abrasivity. Standard plates deliver consistent low moisture and long service intervals.

Copper

Flotation concentrate and tailings dewatering in continuous circuit operations. Compatible with major copper processing plant filter configurations.

Gold

Fine particle gold concentrate filtration requiring precise pore structure and clean scraper discharge to minimise product loss.

Lithium

Spodumene and lithium carbonate concentrate dewatering in battery-grade processing circuits. High chemical resistance essential.

Nickel

Laterite and sulphide nickel concentrate filtration. Plates engineered to resist abrasive slurry and maintain consistent filtrate clarity.

Lead & Zinc

Multi-metal concentrate separation and dewatering. Standard plates support efficient water recovery and tailings handling in polymetallic operations.

Request Engineering Support

Ready to order or need a custom fit?

Share your machine model, current plate drawing or a worn sample. Our engineering team will confirm dimensional compatibility and prepare a sector plate specification for your disc filter system -- with safety stock available for fast dispatch.

  • OEM drawing matching
  • Safety stock for all 3 sizes
  • Global shipping support
Get a Quote

Drawings, samples and machine models welcome