Industry Solutions

Engineered filtration for every mineral challenge.

Water-cast alumina ceramic filter plates matched to the precise pore size, wear resistance and chemical tolerance demanded by your ore type -- from tailings dry-stack to fine concentrate dewatering.

Industries Served
4+
Pore Size Range
1-20 µm
Annual Capacity
400K plates
Experience
10+ Yrs

Precision Matching Technology

Right pore size. Right wear grade. Right solution.

Our engineers analyze three critical mineral parameters before specifying any ceramic filter plate -- ensuring optimal filtration performance from day one.

Particle Size (D50)

Pore diameter matched to feed particle distribution -- preventing blinding while maximising flux.

pH & Chemistry

High-alumina formulations resist acid and alkaline slurries, protecting membrane integrity over long service cycles.

Abrasiveness

Wear-grade ceramic density and surface hardness selected to match silica content and coarse particle impact.

Tailings Management

Tailings Dry Stack
Dewatering

Tailings dry stacking demands consistent low-moisture cake output under high-throughput, continuous duty. Our water-cast ceramic filter plates are engineered for the high abrasion and variable particle size distribution typical of iron, copper and gold tailings slurries.

By precisely controlling micropore diameter (typically 2-8 µm for tailings applications) and adopting a reinforced alumina body, our plates deliver stable filtrate clarity and cake moisture below 18% -- enabling compliant dry-stack facility design.

Cake Moisture ≤ 18%

Exceeds dry-stack regulatory thresholds for most jurisdictions.

High Wear Resistance

Hardened ceramic body withstands coarse, silica-rich tailings.

Continuous Duty Rated

Monolithic sintered structure resists fatigue under 24/7 cycles.

Water Recovery

Clean filtrate enables process water recirculation and reuse.

Iron Ore Tailings Copper Tailings Gold Tailings Lead-Zinc Tailings
Ceramic filter plates operating in a tailings dry stack dewatering facility
High-performance ceramic filter plates for concentrate dewatering in mineral processing

≤ 10%

Moisture Content

1-5 µm

Pore Range

99%+

Solid Retention

Mineral Processing

Fine Concentrate
Dewatering

Fine concentrate slurries -- iron, copper, lithium, nickel -- require extremely tight pore control to achieve low cake moisture without sacrificing throughput. Our advanced water-casting process creates a highly uniform micropore structure at 1-5 µm, delivering superior capillary suction and rapid cake formation.

The result: concentrate moisture consistently below 10%, reducing downstream drying energy costs and improving smelter feed quality.

Uniform Micropore Structure

Water-casting technology produces consistent 1-5 µm pores that maximise capillary action for fine particle filtration.

Chemical Stability

High-purity alumina body resists acid leach and flotation reagent environments common in copper and lithium circuits.

Extended Service Life

Monolithic sintered construction eliminates delamination and membrane separation, reducing plate replacement frequency.

Iron Concentrate Copper Concentrate Lithium Nickel

Aggregate & Construction

Sand & Mining
Slurry Filtration

Sand washing, aggregate processing and mine slurry management present unique challenges: highly abrasive coarse particles, variable feed density and strict environmental discharge requirements. Our high-wear-grade ceramic filter plates are formulated with elevated alumina density and reinforced surface hardness to withstand the most aggressive slurry conditions.

With pore sizes configurable from 5-20 µm for coarser feeds, our plates achieve efficient solids capture while maintaining high filtration flux -- critical for high-volume aggregate and sand processing operations.

Maximum Wear Grade

Highest alumina density formulation resists coarse quartz and silica abrasion.

Wide Pore Configuration

5-20 µm pore range accommodates variable particle size in aggregate slurries.

High Throughput

Optimised open porosity maintains high filtration flux under continuous high-volume feed.

Discharge Compliance

Clean filtrate output supports environmental discharge and water reuse requirements.

Sand Washing Aggregate Processing Mine Slurry Phosphate
Ceramic filter plates for chemical and industrial process filtration

Chemical Resistance Profile

pH 2-12

Operating Range

≥ 95%

Al₂O₃ Purity

1,600°C

Sintering Temp

Chemical & Industrial

Chemical & Industrial
Process Filtration

Chemical processing, hydrometallurgy and industrial wastewater treatment place extreme demands on filtration media -- aggressive pH, elevated temperatures and chemically active slurries that destroy conventional filter media rapidly.

Our high-purity alumina ceramic plates (≥95% Al₂O₃) sintered at 1,600°C provide inert, chemically stable filtration surfaces that maintain pore integrity across pH 2-12 environments, delivering long service life and predictable performance in demanding chemical and metallurgical circuits.

Acid & alkali resistant alumina membrane -- stable across pH 2 to 12

High-temperature sintering eliminates organic binders -- no leaching risk

Custom pore size 1-20 µm matched to specific chemical process particle distribution

Supports hydrometallurgy, electroplating waste, mineral acid and phosphate filtration

Hydrometallurgy Phosphate Industrial Wastewater Electroplating

Engineering Reference

Micropore Selection Guide

Match your mineral application to the optimal pore diameter range and wear grade specification.

Application Typical Feed Pore Size Wear Grade Target Moisture
Fine Concentrate Iron, Copper, Lithium, Nickel 1-5 µm Standard ≤ 10%
Tailings Dewatering Iron, Copper, Gold, Lead-Zinc 2-8 µm High Wear ≤ 18%
Sand & Slurry Aggregate, Phosphate, Mine Slurry 5-20 µm Maximum Wear ≤ 22%
Chemical / Industrial Hydromet, Wastewater, Phosphate 1-20 µm (custom) Acid-Resistant Application-specific

All pore sizes and moisture values are indicative. Contact our engineering team for application-specific recommendations.

Why our solutions perform

Manufacturing capabilities behind every plate

Water-Casting Process

Advanced water-casting technology produces the most uniform micropore distribution available in ceramic filter media.

Integral Sintering

Whole-body sintering at 1,600°C creates a monolithic ceramic structure -- no bonded layers to separate or delaminate.

R&D Partnership

Collaborative research with Shandong University of Technology New Materials Laboratory continuously refines our ceramic formulation.

Certified Quality

Provincial key new materials project with in-house physicochemical testing lab -- every batch verified before shipment.

Get a tailored solution

Tell us your ore type. We'll specify the right plate.

Share your mineral characteristics -- particle size (D50), pH range and abrasiveness index -- and our engineering team will recommend the optimal pore diameter, alumina grade and wear specification for your vacuum ceramic filter system.

  • Ore / mineral type
  • Particle size distribution
  • pH and chemistry
  • Filter machine model / brand